Publicité
Installation and Operating Instructions
EN
ATTENTION
CHAPTER 3
SCOPE OF DELIVERY
Soffit element installation package – KWL 45-160 LE-RP
2 .3
Receipt
The shipment must be checked for damage and correctness immediately upon delivery. If there is any damage,
promptly report the damage with the assistance of the transport company. If complaints are not made within the agreed
period, any claims could be lost.
2 .4
Storage
It is recommended to leave the product in the original packaging before installation. When storing for a prolonged time
the following steps are to be taken to avoid damaging influences:
Protection by dry, air- dustproof packaging (plastic bags with drying agent and moisture indicators). Vibration-free and
waterproof storage at a constant temperature between +10 °C to +40 °C.
Leave the delivery in the packaging until just before mounting or installation in order to prevent any possible damage
and contamination.
2 .5
Driving rain impermeability
The seal between the plaster frame and the building facade must be made impermeable to driving rain on site
through suitable measures . The soffit grille is a visible part and does not serve as a safeguard against driving
rain .
3 .0
Scope of delivery
The delivery contains the Soffit element installation package KWL 45-160 LE-RP.
ò
Wall installation sleeve
– Length 500 mm
ù
Condensate wedge
– for gradient to condensate drainage
– with labelling "centre bottom"
ä
Wall installation sleeve seal
ë
Soffit channel
– with 4x stainless steel screws (Ø 5 x 100 mm)
– with 4x stainless steel washer
ö
Plaster frame
– with labelling "TOP"
– with 2x insulation fixing
ü
Protective cover
– 2 pcs
– to prevent contamination of the wall installation sleeve
Å
Installation wedge
– 6 pcs (as a block)
– for fixing the wall installation sleeve in the core hole
3 .1
Dimensions
All dimensions in mm
ù
8
3
ò
ë
ö
ä
ü
Å
Fig .1
Fig .2
Publicité
