Publicité
EN
Preparing the sprayer for longterm storage
1) Make sure you have already completed the Cleanup
steps on pages 35-36.
2) Remove the inlet filter. You may need to use a screwdriver
to pry it loose.
Inlet lter
3) Pour approximately 10 ml of light household oil into
the inlet valve.
4) Remove hose from outlet valve, place a rag over the
outlet valve, and turn the switch ON. Let the unit run
for five seconds.
5) Switch the pump OFF.
6) Reinstall the inlet filter and press the button on the filter.
7) Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint.
38
STORAGE
Button
Control Pro 300 Move 18V
Storage/Conservation of the gun
1) Remove the nozzle and nozzle holder from the gun.
2) Pour a few drops of oil into the gun.
3) Reassemble the gun.
Publicité
