Publicité
Control Pro 300 Move 18V
Tools needed for assembly
•
Two adjustable wrenches.
WARNING
Only insert the battery when the device is fully assembled.
Hose
Twist the thread at the end of the
hose onto the hose connection.
Using a wrench, hold the hose
connection firmly and tighten the
hose with another wrench.
If the appliance will be carried like
a rucksack, open the hose holder
and hook in the rolled-up hose.
ASSEMBLY
Carrying strap
Attach the carrying straps to the
quick-release fasteners at the top
of the device.
Hook the carrying straps onto the
bottom of the device.
Hang the device over your
shoulders and adjust the straps to
suit you.
If the device is tilted too much
(e.g. when bending forwards), an
acoustic signal sounds.
EN
29
Publicité
