Publicité
2-SPEED CORDED POWER DRILL
PNS 300 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for screwing and un-
screwing screws and drilling into wood, metals
and plastics.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
Features
Speed selector switch
Cover for carbon brushes
Rotation direction switch/lock
Locking button
ON/OFF switch / speed control
Torque selection ring
Bit holder
Chuck ring
Chuck
Bit
│
GB │ IE
■
12
Package contents
1 2-speed corded power drill
1 bit (50 mm)
1 set of operating instructions
Technical data
Rated power
consumption:
Rated voltage:
(AC)
Gearbox:
Rated idle speed:
Max. torque:
Torque levels:
Chuck capacity:
:
Max. drill diameter:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Vibration emission value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Drilling in metal:
a
= 3.758 m/s
2
h,D
Uncertainty K = 1.5 m/s
Idle speed/max. speed:
a
= 0.697 m/s
2
h
Uncertainty K = 1.5 m/s
Wear hearing protection!
300 W
230 V ∼ 50 Hz
2-speed gearbox
1st gear: n
0–400 rpm
0
2nd gear: n
0–1600 rpm
0
40 Nm
1–22 + 1 drill setting
max. Ø 10 mm
25 mm for wood
10 mm for steel
II / (double insulation)
L
= 81.2 dB (A)
PA
K
= 3 dB
PA
L
= 92.2 dB (A)
WA
K
= 3 dB
WA
2
2
PNS 300 A1
Publicité
