Publicité
1. Remove the control unit
unit
(6)
.
2. Place the battery
ment
(7)
(note the polarity + / –).
The connection LED is flashing.
3. Push the control unit
(6)
unit
.
3.4 To connect the Water Control [ Fig. I3 ]:
The Water Control is fitted with a sleeve nut
taps with G 1" (33.3 mm) thread. The adaptor sup-
(8)
plied
allows the Water Control to be connected
to taps with a (G 3/4") thread (26.5 mm).
1. For a tap with a G 3/4" (26.5 mm) thread:
Screw the adaptor
(do not use pliers).
4. OPERATION
4.1 Manual operation by the Water Control
[ Fig. F1 ]:
The valve can be opened or closed manually at
any time. Even a time-controlled open valve can be
closed earlier without changing the schedules.
If the Water Control is in "Sleep Mode", push the
Man. Button 2 times.
8
GAR_01889-80.960.02_2024-05-21.indb 8
GAR_01889-80.960.02_2024-05-21.indb 8
(5)
from the valve
(B)
in the battery compart-
(5)
back onto the valve
(9)
(8)
onto the tap manually
2. Screw the sleeve nut
the adaptor thread by hand (do not use pliers).
3. Screw the tap connector
Control.
3.5 To connect the Soil Moisture Sensor
(optional) [ Fig. I4 ]:
In addition to time-dependent control, it is also
possible to include soil moisture.
for
Once the soil is sufficiently moist, a watering
operation as per schedule will not be carried out.
1. Place the Soil Moisture Sensor in the area to be
irrigated.
2. Plug the connector
the Control Unit
1. Push the Man. Button
manually (or to close an open valve).
The LED Active Watering
10 sec.
2. Push the Man. Button to close the valve early.
The watering duration is according to the parameter
of the GARDENA Bluetooth
(9)
of the Water Control onto
(10)
onto the Water
(11)
into the sensor socket of
(5)
.
(4)
to open the valve
(3)
is lighting green for
App.
®
21.05.24 08:25
21.05.24 08:25
Publicité
