Publicité
If a time controlled watering has been stopped
manually, this watering cannot start again.
If the valve has been opened manually and a pro-
grammed start of a watering period overlaps the
manual opening period, the programmed starting
time is suppressed.
5. MAINTENANCE
5.1 To clean the filter [ Fig. M1 ]:
(12)
The filter
should be checked regularly and
cleaned when necessary.
5.2 To clean the Water Control:
DANGER!
Risk of injury and risk of damage to the
product.
GAR_01889-80.960.02_2024-05-21.indb 9
GAR_01889-80.960.02_2024-05-21.indb 9
Risk of physical injury!
4.2 Factory Reset [ Fig. I1 / F1 ]:
The Water Control Bluetooth
factory settings.
(B)
1. Remove the battery
2. Push and hold the Man. Button
(B)
the battery
in the battery compartment
(note the polarity + / –).
3. Push and hold the Man. Button
10 seconds.
After approx. 10 seconds the factory setting is
restored and the connection LED is flashing.
v Do not clean the product with water or
with a water jet (in particular high-pres-
sure water jet).
v Do not clean with chemicals including
petrol or solvents. Some can destroy
critical plastic parts.
v Clean the Water Control with a soft, damp cloth.
will be reset to the
®
.
(4)
and place
(7)
(4)
for another
21.05.24 08:25
21.05.24 08:25
9
Publicité
