Publicité
Problem
Hot Water is not hot
enough
No grinding
Powder is too coarse
No coffee beans fall or
bean are overflowing
when taking off the
bean box
Too less or too much
powder
Possible Cause
The machine is operated before
it has warmed up properly.
The bean container is not in
position
The "powder thickness
selection knob" is not set
correctly.
Bean container gasket not
fitted or not fitted correctly
Powder quantity knob not set
correctly
Suggested Solution
Wait until the three left-hand indicator
lights are steady before starting to
work.
Rotate the bean container into
position and turn the knob into
position.
Set the "Powder thickness selection
knob" to the thin position.
Place the bean container gasket in the
correct position.
Set the "Powder amount knob" to
the correct position according to the
thickness of the beans.
EN
31
Publicité
