Publicité
EN
24
OPERATION
Before use
1.
Pour water into the tank, the water level should not exceed the "Max" mark in
the tank.
2.
Remove the funnel from the packaging and place the filter inside. Then place
the funnel on the support and ensure that it locks into place. (The funnel
handle is aligned with the lock symbol).
3.
Bean box installation: Turn the "grind adjustment knob" counter-clockwise to
the end (as shown below in image 1). Then take down the coffee bean cover
and make sure the "bean box's elastic knob" is unlocked (As shown below in
image 2), then place the bean box in position and turn the "bean box's elastic
knob" clockwise to lock (as shown below in image 3).
Image 1
Note: Before reassembling the bean container, check that the "Bean container
seal ring" is correctly installed as shown in the diagram below.
Image 2
Image 3
Publicité
