Télécharger Imprimer la page

Klarstein GRANDPRESSO Mode D'emploi page 27

Publicité

froth starts to rise, you can turn the steam knob to " " and press "
stop.
4.
When the milk froth is finished, turn on the steam knob to pump water and
clean the inside of the steam tube to prevent the steam nozzle from clogging.
Details of the steps in the following cooling function method.
Note: If you want to continue making milk froth, simply turn on the steam knob
directly. Do not press the "
Hot water function
Method 1: Press the on/off button and wait until the preheating is finished, then
all the indicator lights will be on normally, then press "
the pump will start working, hot water will flow out of the outlet and will stop
automatically after about 8 seconds.
Method 2: Press the on/off button, turn the "steam knob" to " " and the steam
tube will start to flow hot water continuously; turn the "steam knob" to " " to
stop the hot water.
Memory function
After the preheating (when the „
button pressed and the coffee will start to come out. When the desired amount
is reached, release the
that the time has been memorised. The next time you press the "
machine will brew coffee according to the set time (not more than 60 seconds,
otherwise the memory function is invalid).
Note: The memory function can only work if you press and hold the button for
more than 10 seconds, but not more than 60 seconds.
"
" Memory Brewing is the same as the above operation.
Hot water quantity setting: after preheating, keep "
starts working and hot water flows out of the hot water outlet. When the desired
amount is reached, release the "
memorised. The next time you press the "
according to your setting. (The time should be within 5-30 seconds, otherwise the
function is invalid)
Restore factory settings: Plug the machine in, press the "
simultaneously for 3 seconds before starting the machine (do not press the power
button). When the appliance beeps 3 times, restoring the factory settings is done.
" button.
" and „
" lights are lit), keep the "
" button and the machine will beep once. This means
" button. This means that the time has been
" button twice, the hot water will flow
" to
" twice quickly and
"
" button, the
" pressed, the pump
" and "
" buttons
EN
27

Publicité

loading

Ce manuel est également adapté pour:

1004666510046666