Publicité
EN
26
Make Espresso Coffee
1.
Take the funnel out of the "funnel holder" and use the tamper to press the
coffee grounds flat; at the same time, wipe the coffee grounds along the edge
of the funnel with a brush or your hand.
2.
Insert the funnel into the coffee spout and lock it tightly as an indicator, then
place the coffee cup under the funnel.
3.
At this point, quickly press "
water comes out of the hot water pipe, please proceed to step 4.
Note: Without this step, it will not work for brewing coffee.
4.
When the "
" and "
the coffee will start to flow out 1 cup of coffee. (Or press the "
make 2 cups of coffee).
5.
At the same time, adjust the position of the coffee cup so that the coffee liquid
flows into the cup along the cup wall.
6.
When the coffee has been brewed, the machine will stop automatically. Wait
for the coffee to drip, it's ready!
Steam milk foam function
1.
First press the on/off button and then "
light of "
" will start flashing and the machine will start preheating until the
indicator light stops flashing, then the preheating is completed.
2.
Pour the iced whole milk (4-8°C) into 1/3 of the Latte Art cup, immerse the
steam nozzle into 1cm of the milk, then slowly turn on the steam knob until
steam starts to come out.
Note: Do not exceed 2 minutes for frothing. Before frothing, turn on the steam
knob to release some water from the steam tube.
3.
When the temperature of the milk reaches about 75 degrees and the milk
" twice and the water pump will start. When
" light is always on, press the "
". At this time, the red indicator
" button once and
" button to
Publicité
