Percent Determination; Entering The Reference Weight By Weighing - KERN and SOHN ALJ Mode D'emploi

10.5 Percent determination

Percent determination allows weight display in percent, in relation to a reference
weight.

10.5.1 Entering the reference weight by weighing

 In weighing mode press MENU button. The first menu item „count" is displayed.
 Press MENU button repeatedly
 Acknowledge using PRINT button, the current setting is displayed.
 Using MENU button select „PErc A"
 If using a weighing container, put this before pressing the PRINT button. The
taring process is automatically started. „0-t" is displayed.
 Put on reference weight (=100 %)
 Wait until the weight display of the balance has become stable and then press
the PRINT button. The weight is adopted as reference (100%).
 Remove reference weight. From now the balance is in percent determining
mode.
 Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in terms of the reference
weight.
66 ALJ/ALS/PLJ/PLS-BA-e-1640