Gewiss JOINON Manuel D'installation Et Usage page 31

Operation
SELECT OPTION SELECT OPTION
IMMEDIATE CHARGE IMMEDIATE CHARGE
4. A screen will be displayed with a flashing connector. Connect the cable to the required electrical socket.
5. When the vehicle is connected to the station the following screen is shown indicating that the charging
process has started correctly.
Ending the charge process
6. To finish the charge cycle identify the card using the reader. The station interrupts the electrical supply
and unlocks the connector.
7. Pull out the connector.
The station will return to the awaiting vehicle status.
Deferred charge
For paired charge points the option to defer the charge process is possible. In order to be able to select this type of
charge the station must have the deferred charge option enabled.
The time selected to start the charge process can be adjusted afterwards by the user.
The charge process is the same as the immediate charge, differing in the following points:
Starting the charge process
1. Check that the station is in the awaiting vehicle status, showing the following two screens alternately:
ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual ABA2023IQM01_ - 7.55.4.494.0
To browse through the different options, press the buttons
or .
When the IMMEDIATE CHARGE option is highlighted,
press .
The DEFERRED CHARGE option is only shown if it is
enabled in the station.
CHARGING CHARGING
Gewiss
EN
ES
FR
IT
HU
31