Operation; Status Indication - Gewiss JOINON Manuel D'installation Et Usage

Operation

9. Operation
The main function of the charging station is to supply and measure electrical energy for users that have prior
authorization by an RFID card reader system (authentication and power measurement not available in JOINON
Home).
This section describes the operation of the charging station in detail.
In JOINON Home charging stations it is possible to load different configurations via USB.

9.1. Status indication

The charging station indicates its current status by means of light signals from several LEDs.
Status
Awaiting vehicle Continuous green
Awaiting charge
Charge Continuous blue
Reduced consumption
ABA2023IQM01_ - 7.55.4.494.0 ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual
LED
LED locations
Lighting
The charging station is waiting for a vehicle to be connected in order to
proceed with charging.
Flashing yellow INGEREV GARAGE Basic without RFID reader
A user has selected the type of charge (N or L) using the key and the
charging station is waiting for the user to connect their vehicle to this
station.
INGEREV GARAGE Basic with RFID reader, INGEREV GARAGE Wall,
INGEREV GARAGE One
A user has identified a card using the reader and the charging station is
waiting for the user to connect their vehicle to the station.
A vehicle has been connected to the charging station and the charging
process is active.
Flashing blue A vehicle has been connected to the charging station and the consumption
is reduced.
Description
Gewiss
EN
ES
FR
IT
HU
27