Languages(Joinon Parking); Incidents - Gewiss JOINON Manuel D'installation Et Usage

Operation
this is complete press to adjust the seconds. Once these have been selected press
information screen will be displayed:
CHARGING CHARGING
6. When the set charge start time is reached the station will show the following screen indicating that the
charging process has started correctly.
Ending the charge process
7. To finish the charge cycle identify the card using the reader. The station interrupts the electrical supply
and unlocks the connector.
8. Pull out the connector.
The station will return to the awaiting vehicle status.
Loss of supply (immediate charge and deferred charge)
When faced with a loss of electricity supply the station remains inactive until the supply is restored.
After the supply is restored the station automatically restarts and switches to the status active before the supply
was lost.

9.3. Languages(JOINON Parking)

The information of each user session is displayed in the language configured on each card, regardless of the
default language configured in the station.
In the case of users with no language configured, the station displays the information in the default language set.

9.4. Incidents

The incident can be caused by different reasons. The charging station switches to incident status. On the JOINON
Parking station the stop reason is indicated on the display.
Fault in the installation (error code 0001)
The station protections have tripped.
The station detects that the fault persists in the installation and the protections will not be restored until the fault
disappears.
The electrical installation must be checked by qualified personnel.
Interrupted supply (error code 0002)
• Absence of electricity grid. There is no electricity supply. The station restarts when it is restored.
• The protections have tripped. The protections have tripped but the fault causing the trip has disappeared.
In the case that unit has resettable protections, the station will reset the protections shortly.
ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual ABA2023IQM01_ - 7.55.4.494.0
When the charge start time is reached the charge will be
carried out.
CHARGING CHARGING
Gewiss
again. The following
33
EN
ES
FR
IT
HU