Unit Description; Models; Compliance With Regulations; Emc Requirements - Gewiss JOINON Manuel D'installation Et Usage

Gewiss

2. Unit description

2.1. Models

JOINON Home
JOINON Home GW68101 (single phase)
JOINON Home GW68102 (single phase)
JOINON Home GW68101R (single phase)
JOINON Home GW68102R (single phase)
JOINON Parking
JOINON Parking GW68103 (single phase)
JOINON Parking GW68103R (single phase)
JOINON Parking GW68104C (three phase)

2.2. Compliance with regulations

CE marking
CE marking is mandatory for the sale of any product within the European Union, without prejudice to standards or
laws. These charging stations have the CE marking because of their compliance with the following directives:
• Low Voltage Directive 2014/35/EU.
• Electromagnetic Compatibility Directive 2014/30/EU.
To comply with each directive, compliance with the parts applicable to our units of the appropriate harmonized
standards is sufficient.
Low Voltage Directive
These charging stations sufficiently comply with this directive by means of compliance with the applicable parts of
harmonized standard EN 61851 Electric vehicle conductive charging system.
Electromagnetic Compatibility Directive
These charging stations sufficiently comply with this directive by means of compliance with the applicable parts of
harmonized standards:
• EN 61000-6-1 Electromagnetic Compatibility. Part 6-1: Generic standards - Immunity for residential,
commercial and light-industrial environments.
• EN 61000-6-3 Electromagnetic Compatibility. Part 6-3: Generic standards - Emission for residential,
commercial and light-industrial environments.
Compliance with these standards calls for compliance with limits and procedures in other standards of the same
series.

2.3. EMC requirements

These charging stations have the necessary filtering elements to comply with EMC requirements for domestic
applications in order to prevent disturbances in other equipment outside the installation.

2.4. Protection class

These charging stations meet IP54 protection class against external agents.
This unit is designed to be used indoors and outdoors.
8 ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual
ABA2023IQM01_ - 7.55.4.494.0
Unit description