Accessories; Environmental Protection; Technical Specifications - Metabo KS 66 Plus Notice Originale

- Remove the saw blade fixing screw (22) by turning
it in counter-clockwise direction.
- Remove the outer saw blade flange (21). Pull back
the movable safety guard (19) and remove the
saw blade. (20)
- The contact areas between the inner saw blade
flange (18), the saw blade (20), the outer saw
blade flange (21) and the saw blade fixing screw
(22) must be clean.
For correct operation of the safety clutch,
the contact surface of the saw blade fixing
screw (22) that contacts the saw blade must be
coated with a thin film of grease. Regrease with
a multi-purpose grease (DIN 51825 - ME / HC 3/
4 K -30).
- Insert a new saw blade, making sure the direction
of rotation is correct. The direction of rotation is
indicated by arrows on the saw blade and safety
guard.
- Put on the outer saw blade flange (21).
- Tighten the saw blade fixing screw (22).
Use only sharp, undamaged saw blades. Do
not use any cracked saw blades or blades that
have changed their shape.
Do not use any saw blades which have a
thicker base body or a smaller width cut than
the splitting wedge.
Do not use any saw blades made from high-
alloy high-speed steel (HSS).
Do not use any saw blades which do not
conform to the specified rating.
The saw blade must be suitable for the no-load
speed.
Use a saw blade that is suitable for the
material being sawn.

11. Accessories

Use only genuine Metabo accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating instruc-
tions.
See page 4.
A Guide rail
B 2 clamp clips. To secure the guide rail.
C Connectors for joining 2 guide rails 6.31213
D Circular saw blades. For wood and similar
materials. Medium cutting quality.
E Circular saw blades. For wood and similar
materials. Also suitable for coated boards and
plastics. Clean cut.
F Circular saw blades. For wood and similar
materials, plastics, polymer material,
composite working materials, thin-walled non-
ferrous metals.
G Multi-material saw blades. For solid wood (also
with nails), chip boards, plastics, aluminium,
brass and copper.
H Universal vacuum cleaner, special extractor
I Suction hose
J Connector with bayonet lock
K Metabox
For a complete range of accessories, see
www.metabo.com or the main catalogue.
12. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

13. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.

14. Technical Specifications

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
P = Rated input
1
P = Power output
2
n * = No-load speed
0
n * = On-load speed
1
T = max. depth of cut (90°)
90°
T = max. depth of cut (45°)
45°
A = Adjustable diagonal cut angle
D = Saw blade diameter
d = Saw blade drill diameter
a = Max. base body thickness of saw blade
b = Cutting width of saw blade
c = Thickness of splitting wedge
m = Weight
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
ENGLISH en
15