Publicité
Rear turn indicators (fig. 55 and fig. 56)
Remove the screw (1) and detach the glass (2) together
with the indicator body holder (3). Remove the bulb
assembly (4) from the bulb holder (5).
Change the bulb and refit the bulb assembly (4) into the
bulb holder (5).Refit the glass (2) and bulb holder (5) to the
indicator body holder (3) so that the two tabs of the bulb
holder (5) fit into the projection inside the bulb body holder
(3).
Refit the glass and tighten the screw (1).
2
1
fig. 55
4
3
2
fig. 56
57
E
Publicité
