Télécharger Imprimer la page

Electrolux EKK603507 Notice D'utilisation page 31

Masquer les pouces Voir aussi pour EKK603507:

Publicité

• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Catalytic walls
The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
walls while the oven operates.
To support this self-cleaning process heat
the oven without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Set the Conventional Cooking function.
• Set the oven temperature to 250 °C and
let oven operate for 1 hour.
• Clean the oven cavity with a soft and damp
sponge.
Warning! Do not attempt to clean
catalytic surface with oven sprays,
abrasive cleaners, soap or other
cleaning agents. This will damage the
catalytic surface.
Discolouration of the catalytic surface
has no effect on catalytic properties.
Removable shelf runners and catalytic
panels
To clean the oven cavity remove the shelf
runners and catalytic panels.
Warning! Be careful when you remove
the shelf runners. The catalytic panels
are not attached to the oven cavity and
can fall out when you remove the shelf
runners.
Warning! Before maintenance, make
sure that the appliance is cool. There is
risk of burns because of residual heat.
Removing the side rails
1. Pull the front of the shelf support rail away
from the side wall.
Hold the rear shelf runners and catalytic
panel in place with the other hand.
2. Pull the rear shelf support rail away from
the side wall and remove it
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Cleaning the oven door
The oven door has two panels of glass in-
stalled one behind the other. To make the
cleaning easier remove the oven door and
the internal panel of glass.
Warning! The oven door can close if
you try to remove the internal panel of
glass when the door is still assembled.
Warning! Make sure that the glass
panels are cool, before you clean the
glass door. There is risk that the glass
breaks.
Warning! When the door glass panels
are damaged or have scratches, the
glass becomes weak and can break. To
prevent this you must replace them. For
more instructions, contact your local
Service Centre.
electrolux 31

Publicité

loading