Continuous Drainage
When you plan to leave this unit unused for a long time, please remove the rubber
blockage from the drainage hole at the bottom of unit, and drain all water outside.
You can use the continuous drainage with a drainage hose connected to the bottom
drain hole, when the unit working at the HEAT mode.
The continuous drainage is not need to be applied when the unit working at the COOL
or DEHUMIDIFY mode. The unit can evaporate the condensate water automatically by
the splash motor. Make sure the drainage holes are stemmed well.
If water splash motor is damaged, continuous drainage can be used. To connect the
drain hose to the bottom drain hole (Fig. 6), the unit can also work well.
If splash motor is damaged, intermittent drainage can also be used. Under this
condition, when the water full indicator lights up, please connect a drain hose to the
bottom drainage hole, then all the water in the water tank will be drained outside. The
unit can also work well.
52