health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material
16. Contact authorized service technician for repair or maintenance of this unit.
17. Do not pull , deform. or modify the power supply cord , or immerse it in water.
Pulling or misuse of the power supply cord can result in damage to the unit and cause
electrical shock.
18. Compliance with national gas regulations shall be observed.
19. Keep ventilation openings clear of obstruction.
20. Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification
21. Servicing shall only be performed as recommended by the equipment
manufacturer.
Maintenance and repair requiring the assistance of other skilled personnel shall
be carried under the supervision of the person competent in the use of flammable
refrigerants.
22. Do not operate or stop the unit by inserting or pulling out Die power plug, it may
cause electric shock or fire due to heat generation.
23. Unplug the unit if strange sounds, smell, or smoke comes from it.
Notes:
—If any parts damage, please contact the dealer or a designated repair shop;
—In case of any damage, please turn off the air switch, disconnect the power supply,
and contact the dealer or a designated repair shop;
—In any case, the power cord shall be firmly grounded.
—To avoid the possibility of danger, if power cord is damaged, please turn off the
air switch and disconnect the power supply. It must be replaced from the dealer or a
designated repair shop.
36