Publicité
1. INTRODUCTION
TJ Chimeneas y Biomasa congratulates you on purchasing your wood-burning thermo fireplace from the H range and appreciates
your trust in us. Read all the instructions, advice and safety warnings carefully. For any question or issues, consult your installer
or technical assistance service (TAS).
The device must be installed by a professional. Don't forget to keep your invoice or purchase receipt, as this can be requested
for any action within the legal guarantee period in accordance with the provisions of section 7 of this manual.
1.1 Presentation and description of the device
The H90 and H110 thermo fireplaces belonging to the H range are made up of a set of carbon
picked steel sheets joined mainly by welding. This is a watertight unit with a double com-
bustion system with the ECODESIGN mark, synonymous with high performance and respect
for the environment.
H90 and H110 thermo fireplaces must be connected to a hydraulic circuit of radiators or
similar at all times, as they are specially designed to heat the room via these elements. Never-
theless, they also serve as a source of heat by natural convection of the air of the room.
To control combustion (duration and supply of heat) the device features a handle that controls
the air flow for combustion (1), as well as a second regulator that changes the flow of air from
the glass (2) which constitutes the clean glass system.
The hydraulic circuit is comprised of an inertia of 75 L (H90) or 85 L (H110) whose heat sources
comes from the combustion of wood in the fireplace, and the water intake (3) and outlet (4), 1"
female, and an 1/2" female auxiliary socket auxiliary (5), for example for a temperature probe to
control a pump. The maximum working pressure is 2.5 bar.
1.2 Technical features
The attached table shows the features of the different thermo fireplaces TJ Chimeneas y Biomasa reserves the right to modify them
without prior notice.
Nominal power
Nominal power with water
Performance
Energy class
Heatable volume
CO at 13 % O
2
Particulate matter · OGC · NO
% O
)
2
External dimensions
height x width x depth
Internal dimensions
height x width x depth
Weight
Smoke extractor
Air intake
Depression draught
Inert volume
Max. working pressure
Water flow and return
Temp. probe (aux.)
H90
24.2
kW
kW
15.9
77.7
%
-
A
632
m
3
%
0.110
(al 13
mg/m
22.2 · 43.7 · 151.0 25.4 · 60.9 · 172.0
x
3
1339 x 917 x 666
mm
mm
514 x 785 x 420
kg
237
250
mm
120
mm
10 - 14
Pa
75
L
2.0
bar
1" H
-
1/2" H
-
39
5
4
2
1
Main elements
H110
38.5
16.90
83.8
A+
954
0.100
1192 x 1109 x 671
519 x 1015 x 427
262
250
2 x 120
10 - 14
85
2.0
1" H
1/2" H
3
Publicité
