Publicité
Introduction/Safety
LED floodlight head:
Illuminant:
LED module
Max. rated power: LED, 24 W
This product contains a light source of energy
efficiency class "E and F".
LED reading lamp:
Illuminant:
LED module
Max. rated power: LED, 3.7 W
This product contains a light source of energy
efficiency class "F".
Plug-in power supply:
Type:
YM24E1500P
Operating voltage: 220–240 V∼, 50/60 Hz, 0.3 A
Output power:
24 V
Protection class:
II/
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions!
No liability is accepted for consequent damage!
No liability is accepted for damage to property
or persons caused by improper handling or non-
observance of the safety advice!
FATAL INJURY AND ACCIDENT
HAZARD FOR TODDLERS AND
SMALL CHILDREN!
Never leave children unsupervised with the
packaging materials. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please always
keep the product out of the reach of children.
This product may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, so
16 GB/IE
; 1500 mA; max. 36 W
RISK OF
long as they are supervised or instructed in the
safe use of the product and understand the as-
sociated risks. Do not allow children to play with
the product. Cleaning and user maintenance
must not be performed by children without su-
pervision.
To avoid danger to
life from electric shock
Every time before connecting the lamp the mains,
check it and the mains lead for damage. Never
use your light if you find it is damaged in any way.
A damaged light bulb means your life is at
risk from electric shock. If there is any damage,
repairs to be carried out or other problems re-
lated to the light bulb, please contact the service
centre or a qualified electrician.
The external flexible cord on this lamp is not
replaceable; if the cord is damaged, the lamp
must be disposed of.
Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
necessary of the light (see "Technical data").
Never let the lamp come into contact with water
or other liquids.
Always unplug the light from the mains prior to
assembly, disassembly, cleaning or if the light
will not be used for extended periods.
Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric shock.
To avoid danger
of fire and injury
CAUTION! RISK OF INJURY!
Check bulbs for damage immediately after
unpacking. Do not fit defective bulbs into the
light. If they are, contact the service point for
a replacement.
CAUTION! RISK OF BURNS
DUE TO HOT SURFACES!
Ensure the lamp has been switched off and
allowed to cool before you touch it. In this way
Publicité
