EUROM Wall Designheat 2000 Wi-Fi Manuel D'utilisation page 26

Eurom Smart App
CAUTION
Beware that even when operating the heater remotely, all safety precautions
stated in the user manual supplied must be observed.
The device can be operated using an application on a smartphone or tablet. The Eurom Smart
app is the only way to set timer settings for this device.
1. Open the Eurom Smart App manual with the
QR code (Figure 15) or go to
www.eurom.nl/nl/manuals.
2. Complete the Eurom Smart App manual.
•
When the device is connected with Wi-Fi, the
Wi-Fi symbol appears on the screen.
•
If the Wi-Fi symbol is blinking there is no
connection.
Smart Timer
1. Create a schedule with days and times in the Eurom Smart app. Timer settings set in the
app:
•
will be stored on the device;
•
will not be visible on the device;
•
will remain available if Wi-Fi disconnects;
•
will remain available if the device is switched off or unplugged;
•
can only be removed via the app.
2. Check the data in the app regularly.
Reset Wi-Fi connection
•
Press and hold the Temperature and Wi-Fi button on the device for 3 seconds. Existing
connections will be deleted, the Wi-Fi symbol will start blinking and a new connection
will be made.
Switch the Wi-Fi connection off and on
•
Off: Press and hold the MODE button on the device for 5 seconds. The Wi-Fi is switched
off and the Wi-Fi indication will turn off.
•
On: Press and hold the MODE button on the device for 5 seconds. The Wi-Fi is switched
on and the Wi-Fi indication will start flashing.
26
Figure 15