EUROM Wall Designheat 2000 Wi-Fi Manuel D'utilisation page 23

1. Make sure the ON/OFF switch is in the OFF
position (Figure 10, pos. 1).
2. Put the power plug (Figure 10, pos. 2) into an
earthed wall socket that is easily accessible.
Use an earthed wall socket with a minimum
power of 2000 Watt.
Remote control
First time use:
1. Remove the battery protective plastic.
Standard use:
1. Press on the lip (Figure 11, pos. 2) and
remove the slot (Figure 11).
2. Remove the battery (if present) (Figure 11,
pos. 3).
3. Insert a battery (CR2025) as indicated in the
battery compartment. Make sure to insert
the battery correctly.
4. Replace the cover.
Temperature sensor (optional)
CAUTION
For accurate temperature measuring use the external temperature sensor.
Figure 10
Figure 11
23