Changing the light bulb
A defective bulb must be replaced at once.
Switch off the power supply. Remove the
the side (fig. %). When fitting the new
plug or trip the circuit breakers.
Pull off the lamp protection cover from
the existing o-ring (fig. &). Unscrew the
light bulb, you will need to reassemble
bulb and replace with a new item.
Bulbs can be obtained from your local
service agent or an electrical supplier
(230V/15W/E14).
Faults
The refrigerator was checked for correct
function before delivery. In the event of
operating faults, contact your local service
agent, detailing type of refrigerator and
the fault.
Faults can also be due to the tripping of
electrical circuit breakers. The fault is easy
to rectify by resetting the circuit breaker in
question.
Guarantee
We warrant the guarantee as of the delivery
date of the refrigerator to the end user.
Any malfunctions which might occur during
this time despite correct operation and
which are caused by material or construc-
tion errors will be corrected under this gua-
rantee by our customer service.
Not covered by the guarantee:
– light bulbs defects
– Breakage of the glass shelves or polymer
parts
– Defects resulting from not following the
operating instructions or incorrect usage
– Damage claims beyond the guarantee
– Units which have been repaired by third
parties.
34
%
&