Télécharger Imprimer la page

FUST Novamatic EK 69.6-IB Mode D'emploi page 31

Publicité

No liability will be accepted for any pos-
sible damage if the unit is used for any
other purpose, incorrectly operated, or
not repaired by a professional technici-
an. In such cases the guarantee and
other liabilities are rendered null and
void.
If the connection cable of the unit is
damaged it must be replaced by the
manufacturer or by his customer service
or by a similarly qualified person to avo-
id any liability.
Warning: do not operate any electrical-
ly-driven devices inside the foodstuff
compartment.
(fig. @)
Switching on and temperature selection
The temperature controller serves for set-
ting the temperature and switching the
refrigerator on and off.
Important:
The appliance is designed to operate at
room temperatures between +16° and
+32° C. The maintaining of the internal
temperatures of the cooling and freezer
compartments can no longer be guaran-
teed at room temperatures outside this
range.
Normal operation
Set the temperature to a position between
the two temperature symbols (warmer top,
colder bottom) according to the desired
cooling compartment temperature. A tem-
perature of -18° C is reached in the free-
zing compartment from a temperature of
5° C or lower in the cooling compartment
(see also Tips). This conditions are satisfied
from an approximately central position of
the controller.
@
Off
Set controller in the direction «0» as far as
the stop. Cooling and lightning are swit-
ched off. To avoid the build-up of odours,
leave the cooling and freezing compart-
ments doors open when the refrigerator is
out of service for long periods.
Freezer compartment
The ***freezer compartment is suited
for storage of frozen foodstuffs and for
making ice-cubes.
Products which have been thawed out
must not be re-frozen because foodstuffs
can spoil.
Variable inner doors
The cover inserts (Figure &) in the inner doors
can be adjusted somewhat and offer the
option of a customized setting. To change
the location of the inserts and bottle holder:
sequence. (fig. ;).
first lift upwards and lift out, then set the
required height and replace in the reverse
Defrosting
The refrigerator defrosts automatically. Ice
which has formed on the back wall is mel-
ted (about once per day, see also the tips).
The water flows out of the drainage chan-
31

Publicité

loading