Publicité
OPERATION OF THE EXTRACTOR UNIT
When the setting for recirculation is activated in the user menu, an additional message
will appear (after 120 hours) for cleaning the odor filter ('F' and 'C' will appear alternately
in the display of the extraction unit). Your appliance is equipped with Twin filters that
combine a grease filter and odor filter. You can therefore reset this message as described
below and follow the maintenance instructions as described in chapter 'Maintenance/
Filters and water collector'.
Reset the memory of the filter saturation indication
Reset the memory after the maintenance/replacing of the twin filters.
1. Switch on the hob.
2. Touch and hold the extraction key for 3 seconds.
On the display of the extractor unit the saturation indication will disappear and the
▷
memory starts counting over again.
EN 21
Publicité
