Télécharger Imprimer la page

ETNA AKI580 Serie Mode D'emploi page 43

Publicité

OPERATION OF THE HOB
Please read the chapter 'Before first use' very carefully before you start cooking.
This prevents incorrect use of the hob.
For a proper use of the product, it is recommended to always turn on the air
extraction during cooking.
Start cooking
1. Touch and hold the on/off key until you hear an audio signal.
All displays light up; the induction hob is in standby mode.
The cooking zones and the exraction unit have power level zero.
If the hob is not used for 20 seconds, it will shut off automatically.
2. Place a suitable pan on the cooking zone.
3. Touch the cooking zone key of the cooking zone.
As long as the display of the cooking zone lights up brightly, the cooking zone is
selected and the power level can be set.
When the response time has elapsed, or during cooking, you can activate the cooking
zone by touching the cooking zone key.
4. Within 10 seconds, set the power level by touching the slide control.
The cooking zone starts at the level that has been set.
Boost
You can use the boost function to cook for max. 5 minutes at the highest cooking level. You can
use the Boost function for a maximum of two cooking zones alongside each other at the same
time.
1. Touch power level P to select the Boost function.
'P' shows on the display.
After the maximum boost time the power will be reduced to power level 9.
Pan detection symbol
When the pan detection symbol appears in the display:
you have not placed a pan on the correct cooking zone;
the pan you're using is not suitable for induction cooking;
the pan is too small or not properly centred on the cooking zone.
The cooking zone will not work unless there is a suitable pan on the cooking zone.
EN 13

Publicité

loading