Connection With A Printer/Digital Still Recorder - Sony DXC-9000 Mode D'emploi

Connection With a Printer/Digital Still Recorder

The unit outputs a write enable control signal (WEN) with
the video signal so as to enable a printer or digital still
recorder to capture the image to memory.
For details on remotely controlling the operation of the printer or
digital still recorder, refer to the manuals supplied with them.
CCMC-9DSMN cable
Remote
Video input
connector
connector
Video monitor, VCR, etc.
Video input
connector
114
RGB/SYNC
Video output connector
75Ω coaxial cable
To set up the system, perform the following settings on the
menus.
• Set "G SYNC" on PAGE 3 menu to "ON".
• Set "D-SUB Sync" on PAGE 3 menu to "WEN".
For details on menu settings, see "G SYNC" on page 84 and "D-
SUB Sync" on page 85.
DXC-9000
FREEZE
MENU FUNCTION DATA
UP LENS
WHITE
SOURCE BARS
DOWN
CCU
SCAN
RGB/SYNC
REMOTE
VIDEO OUT
DC IN/
EXT CTRL
VBS
DC IN/VBS
Set the MODE
1
selector to the "1"
2
position.
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/20/25 cable
CMA-D2/D2MD camera adaptor
AC IN
Power cord
CAMERA
(4-pin or 12-pin)