Gima SP-10 Manuel De L'utilisateur page 20

ENGLISH
6.Exit
Under (Personal information) interface, select "Exit" to return to (Menu)
interface.
Figure 11
b. Data management
Under (Menu) interface, select "Data management" to enter (Data ma-
nagement) interface, as shown in Fig.13. Under the interface, functions
such as review, view trend curve, delete data, denote value setting can
be realized.
Figure 13 Data management interface
(1) Review function
Under (Data management) interface, select "Review function" to enter
(Case selection) interface as shown in Fig.14, press "Up" or "Down" key
(long press is available) to change case number, then press "Confirm" key,
the device will enter (Main interface) and display history data on it. Un-
der (Main interface), press "Up" or "Down" key continuously can review
data in adjacent case number, press "Confirm" key to return to (Menu)
interface.
Figure 12
Figure 14 Case selection interface
(2) Trend curve
Under (Data management) interface, select "Trend Curve" to enter (Trend
curve selection) interface as shown in Fig.15. Select the determinant pa-
rameter, then press "Confirm" key to enter (Trend curve display) as shown
in Fig.15. The curve is a summary of stored data for selected parameter. It
displays the change trend in form of visual image, which is convenient for
comparison. If the data is too much, press "Up" or "Down" key to browse
all data trend curves orderly. Press "Confirm" key to return to (Data ma-
nagement) interface.
Figure 15 Trend curve selection interface Figure 16 Trend curve display interface
(3) Delete data
Under (Data management) interface, select "Delete data" to enter (Dele-
te data) interface as shown in Fig.17. If choose "Yes", the screen displays
"waiting...", all data will be deleted, then return to (Data management)
interface. If choose "No", it will return to (Data management) interface
directly.
Figure 17 Delete data interface
(4) Denote value
Under (Data management) interface, select "Denote value" to enter (De-
note value setting) interface as shown in Fig.18. Select one parameter to
20