Publicité
7
Operation
7.1
Authorisation
u Authorise (dependent on the configuration).
The following authorisation options are available:
No authorisation (Autostart)
All users can charge.
Authorisation via RFID
Users that have an RFID card that has been entered
in the whitelist can charge their vehicle.
u Hold the RFID card in front of the RFID card
reader.
ð If the RFID card is valid, the bottom LED on the
LED status display will light up green for 1
second (if reader is in delivery state) and an as-
cending sequence of notes sounds.
ð If the RFID card is invalid, the top LED on the
LED status display will light up red for 1 second
and a descending sequence of notes sounds.
If the vehicle is not connected to the
product within 5 minutes, the authorisation
is reset and the product switches to
Standby mode. The authorisation process
must be repeated.
7.2
Charging the vehicle
WARNING
Risk of injury from using unsuitable aids
If unsuitable aids (e.g. adapter plugs, extension
cables) are used during the charging process, there
is a risk of electric shock or cable fire.
u Use only the charging cable intended for the
vehicle and the product.
Requirement(s):
ü The authorisation process is complete (if neces-
sary).
38
ü The vehicle and the charging cable are suitable
for Mode 3 charging.
u Connect the charging cable to the vehicle.
Selecting the charging mode
1 "3.6 Charging modes" [} 10]
The buttons can be used to select the appropriate
charging mode.
Charging mode
"Solar charging"
"Fast charging"
"Solar-assisted charging"
Button
Publicité
