Publicité
LED beha-
Meaning
viour
There is a fault that is preventing
the vehicle from charging (e.g.
fault during charging process).
LED flashes
red.
1 "9 Troubleshooting" [} 42]
3.6
Charging modes
Charging mode
"Solar charging"
"Fast charging"
"Solar-assisted charging"
"Solar charging" mode
The charging power is dependent on the excess
energy from the photovoltaic system. Charging
takes place using solar energy only. The charging
process starts if there is a sufficient amount of en-
ergy available to charge the vehicle at 6 A per
phase.
"Fast charging" mode
Charging occurs at maximum power.
"Solar-assisted charging" mode
Regardless of how much energy the photovoltaic
system is producing at any given time, the vehicle is
always supplied with the minimum charging power
(through mains power if necessary). If there is more
surplus energy from the photovoltaic system, this is
10
also made available to the vehicle. The minimum
charging power can be set via the configuration
tool (this must be done by a qualified electrician).
3.7
The product variants are available with the follow-
ing charging connections:
Permanently connected charging cable with type
Button
2 charging connector
This can be used to charge all vehicles with a type
2 charging plug. A separate charging cable is not
necessary.
Detailed information on the "Solar char-
ging" and "Solar-assisted charging" modes
can be found in the chapter:
1 "6.2.3 "Solar charging" and "Solar-as-
sisted charging" modes" [
Charging connections
26]
}
Publicité
