Publicité
OPERATING INSTRUCTIONS
en
5.3
Notes on UL approval
6
Commissioning
6.1
Alignment
28
O P E R A T I N G I N S T R U C T I O N S | GSE6S
-xxEx1x70
-xxEx1x7E
-xxEx1xA0
-xxEx1xAE
D.ON, NPN Open Collector Q (≤
100 mA)
Table 8: Test input
GSO6Sx-xx2xxxxxx
GSO6Sx-xx3xxxxxx
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a)
max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b)
100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
GSE6SP with visible red light:
Align the sender (GSO6S) with the receiver (GEO6S). Select the position so that the red
emitted light beam hits the receiver. Tip: Use white paper or a reflector as an alignment
aid. The sender must have a clear view of the receiver. There must be no object in
the path of the beam [see
figure
screens) of the sensors are completely clear.
GSE6SI with not visible infrared light:
+ (L+)
Q
‒ (M)
+ (L+)
Test
– (M)
+ (L+)
Test
– (M)
3]. You must ensure that the optical openings (front
+ (L+)
+ (L+)
Q
Q
‒ (M)
‒ (M)
+ (L+)
Test
– (M)
+ (L+)
Test
– (M)
9397275/2024-11-05 | SICK
Subject to change without notice
Publicité
