Publicité
5. How to Assemble
08
01 01
05
05
01 Place the bottom part of the multi-screw (
③
the multi-screw (
screw set.
02 Assemble the hopper cover (
03 Assemble in a way that the [ ] assembly guide mark of the chamber (
assembly guide mark of the hopper (
04 Turn the installed hopper clockwise up to the [
If the internal parts are not assembled correctly, the hopper will not close.
05 Check if the pulp outlet cover and the latch (
1. Lift the pulp outlet cover upward to close it and hook the latch.
2. If the packing is incorrectly assembled or the latch is not properly closed, the pulp outlet
cover may open or juice may leak during extraction.
06 Check if the juice pulp outlet cover and latch are correctly closed.
1. Lower the juice pulp outlet cover downward to close it and hook the latch.
2. If the packing is incorrectly assembled or the latch is not properly closed, the pulp outlet
cover may open or juice may leak during extraction.
07 Place the correctly assembled chamber set onto the product body (
Assemble the chamber set first and then install it on the product body.
02
02
③
④ ④
①-1
⑤ ⑤
②-1
06
06
⑤-9
⑤-9
④
) as shown in the image, and then firmly press the assembled multi-
①
-1) on the hopper (
⑤
-2) are perfectly aligned.
03
03
04
04
07
07
⑤-4
⑤-4
⑤
) into the chamber (
), insert the top part of
②
-1) vertically.
] assembly guide mark.
⑤
-9) are closed correctly.
⑥
②-3
②-3
⑤-2
⑤-2
⑥ ⑥
②
-3) and [
]
).
Publicité
