Publicité
6. Assembly and Disassembly of Silicone
※ Silicone packings are consumables that are
recommended to be replaced once every 6 to 12
months. They are available for purchase through the
Customer Service Center.
(The juicer may leak if the product is not assembled properly.)
Extraction Packing
01
01
02
02
Seal Packing
01
01
02
02
01
01
Hold and take out the packing as if you
are pulling it back.
02
02
After cleaning, insert one side of the
packing first as if you are hooking it.
03
03
Insert the remaining part and press
down the perimeter.
Juice outlet cover packing
01
01
02
02
01
01
Hold and take out the packing as if you
are pulling it back.
02
02
After cleaning, insert one side of the
packing first as if you are hooking it.
03
03
Insert the remaining part and press
down the perimeter.
Juice Cap Packing
After cleaning, insert the packing so that the round
part of the packing faces outward and the lattice grid
faces upward.
Hopper Packing
Assemble the packing as shown in the figure.
Screw Packing
01
01
Pull one side of it to detach it downward.
02
02
After cleaning, check the top and bottom
directions of the packing and insert it
upward as if you hook it at the bottom
part of the multi-screw.
03
03
After checking the direction, thoroughly
press the remaining part of the packing
down to assemble it without any folded
sections.
09
Publicité
