Télécharger Imprimer la page

HUROM H400 Serie Mode D'emploi page 5

Publicité

Instruction Manual [ Home use only / Warranty not included ] | H400 Series
04
CONTENTS
p.04
1. Precautions for Safe Use
p.05
2. Precautions During Use
p.06
3. Power Switch Guide /
4. Precautions Before Juicing
p.08
5. How to Assemble
p.09
6. Assembly and Disassembly of Silicone
p.10
7. How to Use
p.11
8. When Multi-screw Stops During Use
p.12
9. How to Disassemble and Clean
p.13
10. Before Requesting Repair
Before Reading Manual
1. Read 'Precautions for Safe Use ' (p. 04~05) and use
the appliance properly.
2. After reading the manual, keep it in a convenient
location for future reference.
3. Do not use it abroad which has different power
supply and voltage.
4. Any quality improvements is subject to change
without notice.
1. Precautions for Safe Use
01 You should read <Safety Precautions>
02 You should follow <Safety Precautions>
03 Precautions are classified as follows.
Warning A violation of any of the warning marks
may cause a serious injury or death.
Do not insert or pull the power cord with wet hands.
Use the right voltage only as specified on the warranty
card and the product specifications. Failure to follow
this instruction may result in electric shock, fire, or
performance impairment. Connecting to a different
voltage may shorten the motor's lifespan or cause
malfunction.
Securely insert the power cord plug all the way into
an outlet.
Do not bend, tie, damage or pull the power cord by
force, or place it near a high temperature or heat such
as a gas stove. Also, do not place any heavy object on top
of the product, wedge it into a narrow space, or alter it.
Do not remodel it under any circumstances.
Also, do not attempt to dismantle or repair it yourself.
Do not insert any foreign objects such as a finger
or iron pin into any crack or hole in the product
body. It may cause a fire, electric shock, injury and/or
malfunction. For after-sales service and maintenance
of a product, contact the HUROM Customer Service
Center.
When the power plug is damaged, do not repair or
remodel it yourself and, instead, visit an after-sales
service center or branch store.
Do not get wet or splash water on the product body.
Make sure that no water or foreign material goes into
the product's power switch.
Do not control the power switch with wet hands.
For safety, ground the power outlet at all times.
Also, do not ground it to a gas pipe, plastic water pipe,
or telephone line. Make sure to use a grounded outlet.
Do not attempt to dismantle any parts of the
chamber set or insert foreign objects such as a finger
or spoon into the inlet or juice outlet during operation.
Do not use it within children's reach. Children should
be carefully supervised so that they do not play with
this device. There is a risk of an injury or malfunction if
children accidentally hit and knock it down.
A person who is not familiar with handling the
product should not use it him/herself. Anyone with
physical or mental problems or who lacks experience
and knowledge should not use it without a supervisor
present.
Do not use the product while wearing or holding any
items with magnetic force (e.g. magnetic bracelets).
Placing magnetic objects near the product may cause
malfunction.
Caution A violation of any of the caution marks
may lead to a serious injury or death.
Do not operate the product unless the product body
set and chamber set are securely connected.
If there is a gas leak, etc., do not touch the power
cord but, instead, open the windows and thoroughly
ventilate the area.
If the squeezing screw stops spinning during normal
operation, press the "REV" button and hold for 3 to 5
seconds to activate reverse rotation. After reverse
rotation stops completely, press "ON" button again
.
to resume normal operation
stop during the operation, the parts may be damaged or
performance may be impaired due to overheating in the
motor. When such a problem continues, stop using the
product and contact our local customer service center.
Do not move the product body, or disassemble or
assemble the chamber set or parts during operation.
Make sure to stop the operation and pull out the power
cord beforehand.
If the screw continues to

Publicité

loading