Publicité
3 SYSTEM SPECIFICATIONS AND REQUIREMENTS
3.1 Specifications
Fall arrest: Maximum of TWO users: each connected to one of the anchor points on the device (Figure
Performance:
1) and marked with the appropriate symbol (Figure 11, detail 6). The fall arrest system must comply
with EN 363 and the maximum force generated for arrest must be
Rescue / Evacuation: The system can be used with certified devices EN1496:2006 or EN1496:2017
class A or B and the maximum weight of the operator and any accessories to be connected to the
evacuation device is related to the EN1496:2017 device. Please refer to Genesis for a list of compatible
devices and correct media, and to the evacuation device instructions for limitations and operating and
maintenance instructions.
Dimensions:
see Figure 1 for component dimensions.
Conformity:
The Genesi SCPH anchor device complies with EN795:2012 and CEN/TS 16415:2013 TYPE B, EN
365:2005
Maximum load
The device has been tested and has withstood without problems and permanent deformations a maximum
static load of 13kN.
The loads in these instructions were obtained in the laboratory during system approval and do not in any
way represent the rated loads for which the device is designed to operate in operation.
Maximum
In service there is no displacement of the anchor point and the maximum deflection in the event of a fall is
Deflection
less than 10
Materials:
The frame of the device is made entirely of aluminium alloy.
All aluminium components undergo a 15-20 mm anodising treatment with/without colouring.
Sliders and pulleys are made of HDPE and DELRIN
The screws and fasteners are made of A2-70 stainless steel.
For more information, please refer to the device's technical data sheets
Certifications
Compliant with PPE Regulation - 2016/425
MODULE B and C2 - Certificates issued by MTIC InterCert S.r.l.
Via Moscova, 11, 20017 Rho MI FORM C2
Marking/Pictogra
See figure 11 for complete marking of devices.
ms/Labels:
•
•
•
•
•
•
•
•
•
cm
Name and postal address of the manufacturer (4)
Maximum number of users (5)
Dimensions at the two standard angles (5)
Serial number, date of manufacture and model (4): the year and month of manufacture are
indicated by punching the appropriate part of the label.
CE Marking, Full System Reference Standards (3)
(6) Anchor point pictogram
read the instructions for use
Production date
Date of first use/commissioning - filled in at the site by the first user or
owner/operator of the site
less than 6 kN
Pag. 16 di 36
Publicité
