Télécharger Imprimer la page

Sony MHC-GR3 Mode D'emploi page 8

Publicité

co Maal
> continued
*
Remote
=
You can use the MULTI CONTROLLER
to search quickly through tracks on
different discs (seamless feature).
"Automatic Music Sensor
"
If no disc is loaded at that number, the
tray will emerge.
DISC SKIP EX-CHANGE functions differently
depending on a different situation
To select a particular CD, press DISC SKIP
EX-CHANGE while you stop plaving a CD.
To remove or exchange CDs while playing
or pause playing a CD, press DISC SKIP
EX-CHANGE.
To find a point in a track
You can find a particular point in a track
while the track is plaving or while it's in
pause mode. Use the buttons on the remote
to operate this feature.
To
Press
Go forward
quickly in a track
release it at the desired
point.
Go backwards
<J on the remote and
quickly in a track
release it at the desired
point.
Search quickly
without listening
[> on the remote.
Press CD (> or nia]
again at the desired
point.
To check the remaining time during
playback
Press DISPLAY repeatedly.
Each time you press the button, the
display changes as follows:
Playing time on the current track
¥
Remaining time on the current track
+
Remaining time on the current CD*' or
"PLAY" display*?
v
Clock display (for eight seconds)
v
Effect (or P FILE) name or "EFFECT ON
(OFF)"
*' 1 DISC mode
*? ALL DISCS mode
To check the total playing time and
the total number of tracks
Press DISPLAY in stop mode.
When you press DISPLAY again, the
display shows the clock display for eight
seconds and returns to the previous
indication.
Chapter 2: the CD Player
(> onthe remote and
(II), then press <7] or
Notes
«You cannot check the total playing time
during program plav.
¢The disc number, total playing time and
number of tracks also appear in the
display when you press
2 OPEN/CLOSE
to close the disc tray.
°"—.—" appears in the display when the
total plaving time is 100 minutes or more.
One Touch Play feature
Press D>#l on the CD player (or CD [> on
the remote) when the power is off. When a
CD is in the player, you will be able to start
listening to the CD without pressing any
other buttons.
The Music Calendar Display
This display lights according to the number
of tracks.on the CD. As each track is played,
the corresponding number disappears.
Tracks numbered in excess of 20 are not
displayed.
What the green and orange DISC 1-3
button indicators indicate
Indicators are provided on the DISC
buttons for each of the respective disc trays
(DISC 1 - 3).
¢ A green indicator shows that the tray is
selected (either during playback or
standby, or when the tray is open) no
matter if there is a CD inside or not.
¢ An orange indicator shows that there is a
CD on the tray but the tray is not selected.
© When the indicator is off, there is no CD
on the tray and the tray is not selected.
Automatic Source Selection
If the CD player has been in the normal
play mode, you can select the CD player
just by pressing Pl or the DISC 1-3
buttons.
If the CD player has been in the program
play or the shuffle play mode, only >I can
be used for this function.
If there is no CD in the player
"CD no dISC" appears in the display.
Press Pil (or CD
on the remote) while
the indication is on, then the disc tray will
open automatically.
a
ne
eer ee en
era
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on one CD or all
CDs in random order.
Use the buttons on the unit to do this
operation.
POWER—ON
MULTI CONTROLLER
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Press 2 OPEN/CLOSE and place the
CDs on the disc tray. Then, press
& OPEN/CLOSE again to close the disc
tray.
3 Press 1/ALL DISCS to choose "1 DISC"
or "ALL DISCS",
4 Press PLAY MODE repeatedly until
"SHUFFLE" appears in the display.
5 Press Dil.
" 3," appears and then all the tracks
play in random order.
To stop shuffle play
Press Ml on the CD player.
To cancel shuffle play
Press PLAY MODE repeatedly until
"SHUFFLE" disappears from the display.
The tracks continue playing in their original
order.
To select a desired CD
Press DISC 1 - 3 during shuffle play.
~ To skip an undesired track
Press S> on MULTI CONTROLLER (or
press [3] on the remote).
:

Publicité

loading