Publicité
the
stele fe
Playing Preset Radio
Stations
POWER—*ON
ENTER/NEXT
STEREO
MONO
FM<>AM
The tuner starts scanning radio
frequencies, and stops automatically
when it finds a clear station.
"TUNED" appears in the display.
"STEREO" also appears if the tuned FM
station is broadcasting in stereo.
When the desired station is not
tuned in
Automatic tuning may skip stations with
weak signal. Tune in the station manually.
1 Press TUNING MODE repeatedly until
"MANUAL" appears in the display.
2
Pressand hold down
«€ or
S on
MULTI CONTROLLER until the desired
station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop antenna for
=
T change the AM tuning interval
(except for the Middle Eastern
model)
(some models are preset to 10 kHz) in the
factory. If you need to change the interval,
do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Tur off the power.
4 Tur the power back on while pressing
ENTER/NEXT.
After changing the AM tuning interval,
same procedure.
One Touch Play feature
Automatic Source Selection
automatically.
| Chapter 3: the Radio
|
a
Publicité
