Publicité
—]————————————S===
Grouping Tracks
(music clip)
The music clip function is an easy way to
produce up to three groups of tracks from
your CDs. For example, you could store
tracks for the morning in CLIP A, tracks to
play for vour friends in CLIP B, and tracks
for relaxing in CLIP C.
Once you store one or more tracks in a
music clip(s), the player recalls those tracks
whenever you play the respective disc.
Storing Tracks in a Clip
POWER—ON
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Play the track you want to store, or (in
stop mode) press <@ or S on MULTI
CONTROLLER to select the track you
want.
3 Press CLIP button (A, Bor).
"CLIP FILE" appears and the selected
CLIP indicator (A, B or C) appears in the
Uisplay..Normal playback continues.
4 Repeat steps 2 and 3 to store other tracks
into the same or a different clip.
If the memory becomes full
You can store tracks from up to ten
different CDs (one or more tracks per CD)
to each clip data.
The clip data for the oldest clip is erased to
make room for a new clip.
Notes
¢ Only tracks numbered 1 - 20 can be
stored in music clips. You cannot store
tracks numbered 21 or more.
In stop mode, you cannot store tracks if
"SHUFFLE" or "PROGRAM" is
displayed.
Chapter 2: the CD Player
Playing Tracks in a Clip
(CLIP PLAY)
CLIP indicator(s) lights up in the displav to
let vou know when clips are stored for a
disc.
POWER—ON
1 Press CLIP PLAY.
2 Press CLIP button (A, B or C).
"CLIP PLAY" appears in the display
and the selected CLIP indicator lights
up.
The player starts playing tracks from the
selected clip.
To cancel clip play
Press ™ on the CD player.
Notes
«In 1 DISC mode, the tracks stored for the
selected disc are played back once, then
clip play is released.
¢In ALL DISCS mode, all the tracks stored
for the currently loaded discs are played
back once, then clip play is released.
¢ You cannot start CLIP play if
"PROGRAM" is displayed.
Erasing Tracks from a Clip
POWER—ON
CLIP A-C
CLIP ERASE
CLIP PLAY
Erasing one track
1
ress CLIP PLAY.
2 Press CLIP button (A, B or C) for the clip
containing the track you want to erase.
3
Press <«@ or S
on MULTI
CONTROLLER to select the track you
want to erase.
4 Press CLIP ERASE.
"ERASE A -C" and "TRACK" appear
alternately in the display.
5 Press CLIP button (A, B or C) you
pressed on step 2.
Erasing ail the tracks in a CLIP A (B or
c)
1 Instop mode, press CLIP ERASE.
"ERASE A-C" and "ALL A ~-C"
appear alternately in the display.
2 Press CLIP button (A, B or C) to specify
the clip you want to erase.
"PUSH A (B or C)" appears in the
display.
3 Press CLIP button you pressed on step 2
again. "ERASE ALL" appears in the
display and CLIP indicator disappears.
Publicité
