Publicité
Chapter 4:
the Tape
Player
Playing a Tape
Recording a CD
Recording a CD: Selecting
Tape Length.
,
Automatically
(tape select edit)
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (program
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Chapter 4: the Tape Player
You can use TYPE | (normal), TYPE II
(CrO2) and TYPE IV (metal) tapes. When
you insert a tape, the deck detects the tape
type automatically.
1 Press M4 to open tape compartment.
Insert a recorded tape in deck A or B
with the tape side down and the side
you want to play facing forward. Push
to close the compartment. The tape will
start playing from the front side.
The tape starts playing.
To
Press
Stop play
as
Pause
iL
Resume play after
#8
pause
Fast forward
>>
Rewind
Sr alg
ee
Remove the cassette 4
To play both decks in succession
(relay play)
The relay play sequence is
B— A.
1 Press M4 and insert recorded tapes in
both decks.
2 Press > on deck B.
3 Press #l and [> on deck A.
To stop relay play, press M4 on the
playing deck.
é
tf you play both decks at the same
time
You will hear the sound from deck B.
When listening to a tape recorded with the
Dolby* 8-type noise reduction system
Press DOLBY NR button so that "DOLBY
NR B" appears in the display.
The setting affects both decks. Dolby noise
reduction system reduces tape hiss noise in
low-level high-frequency signals.
*
Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation. °
"DOLBY" and the double-D symbol 00
are trademarks of Dolby Laboratories
Licensing Corporation.
One Touch Play feature
Press [> when the power is off.
Y acan listen to the tape without pressing
any other buttons when a tape is in the
deck. When a tape is not in the deck, the
system will just turn on.
Automatic Source Selection
If vou press E> while vou are listening to
other sound source, the tape deck is
selected and the play starts automatically.
Publicité
