Publicité
SAFETY INSTRUCTIONS
Our products have been carefully designed and tested to ensure your
baby's safety and comfort. Complies with safety requirements - Tested
in an approved laboratory in accordance with order no. 91-1292 -
December 1991 - EN1888:2012.
1. This vehicle is intended for children from 0 months and up to 15 kg.
2. Never carry more than 1 child per place in the pushchair at a time.
3. Never lift the pushchair with the child inside it.
4. If the manufacturer of your pushchair recommends using it in
combination with a carrycot or a car seat, then, the maximum
weight for the combination is that indicated on the additional
product.
5. If the manufacturer of your pushchair recommends using it in
combination with a carrycot or car seat, always have them facing
you.
6. Never use stairs or escalators with your child in the pushchair.
7. Always use the most recline position when used for new born
babies.
8. The brake must always be on when putting the child in or taking
him out. Always use the parking brake, even when standing still
for only a few moments!
9. Only use accessories or spare parts sold or approved by the
manufacturer. Using other accessories could be dangerous.
10. For buggies with accessories (depending on the version), please
respect the maximum weight loads indicated below: Ex :
Maximum permitted weight for the play tray 2 kg. Maximum
permitted weight for the net bag 2 kg. Maximum permitted
weight for the storage pocket 1 kg. Maximum permitted weight
for the basket 2kg.
42
CLEANING AND MAINTENANCE
• Maintain and clean the Quinny Moodd frequently.
• Clean the frame and shopping basket regularly using a damp cloth.
Do not use abrasive cleaners.
• When it is raining, always use the raincover to protect the fabric cover.
• After using in the rain, wipe the pushchair with a soft, absorbent
cloth.
• Remove the detachable wheels once a month. Clean the axles and
treat them with a dry Teflon spray. Never use Vaseline, grease or
silicon lubricants.
• The brakes may require periodic adjustment. To do this, use two
8 mm spanners to unlock the lock nut from the long barrel nut.
Adjust the brake cable and retighten the lock nut. Test the brakes to
ensure a positive engagement and disengagement after adjustment.
WASTE SEPARATION
To help protect the environment, we kindly ask you to separate the
packaging waste from the Quinny Moodd and at the end of its useful
life to separate the components and dispose it properly.
Publicité
