Tanks And Filters - Numatic TRO 650 Mode D'emploi

Nettoyage de la machine / De machine schoonmaken
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED
!
Located in your waste water (top) tank is a full tank switch, this stops your machine from
working once the waste water reaches its maximum limit.
Sometimes the switch gets clogged and blocked, clean to ensure correct operation.
IMPORTANT:
the machine.
IMPORTANT:
If the debris basket is allowed to become clogged, vacuum performance can deteriorate.
Ensure tank has been emptied and care is taken when working in the vicinity of batteries.
Machine Cleaning / Reinigen der Maschine /
OFF PRIOR TO ANY MAINTENANCE.
A
B
C
NOTE: ANY SPILLS SHOULD BE WIPED-UP BEFORE TANK IS LOWERED.
32
After use, empty waste-water tank using emptying hose
with clean water.
B
Next empty clean water tank, using emptying hose
!
C
Before removing
connected hoses.
Whilst pressing in the
separator toggles, remove
hood and rinse using clean
water.
The hood also has a
sealing-rubber which should
be examined at every
clean-down.
A