Personnel Requirements - Häfele DT 600 FH Instructions De Montage

2.6 Personnel
requirements
• The operator must clearly regulate and specify the responsibilities for
installation, operation, troubleshooting, maintenance, and cleaning.
• The operator must ensure that all persons handling the DT 600 FH door
terminal with push bar/bar handle have read and understood these instructions
and the BKS instructions. In addition, the operator must train the personnel at
regular intervals and inform them about the risks.
Furthermore, the operator is responsible for ensuring that the DT 600 FH door
terminal with push bar/bar handle is always in perfect technical condition.
The following therefore applies:
• The operator must ensure that the maintenance intervals specified by BKS are
followed.
• The operator must have all safety devices inspected regularly for function and
completeness.
Essential requirements
Only those persons are authorised as personnel who can be expected to carry out
their work reliably.
Persons whose ability to react is affected by, e.g., drugs, alcohol, or medication are
not permitted to operate the system.
In the selection of personnel, observe the applicable age and occupation-specific
regulations.
These instructions describe the qualifications listed below for the personnel for the
various work areas:
Qualified electrician
Qualified electricians are capable of working on electrical systems and recognise
potential hazards and avoid them due to their professional training, knowledge,
experience as well as knowledge of pertinent standards and provisions.
Qualified electricians have been specifically trained for the working environment in
which they operate and know the relevant standards and regulations.
19