Installation Instructions - English; Installation Requirements; Environmental Conditions - Häfele Dialock DT 600 Instructions De Montage

Installation instructions - English

1. Notes on these installation instructions
1.1 Contents and
target group of the
instructions
1.2 Obligations of the
installer
1.3 Obligations of the
operator

2. Installation requirements

2.1 Environmental
conditions
It is essential to pay attention to these instructions in order to install the product
successfully and safely. Please pay attention to all of the specified installation steps,
instructions and notes!
These installation instructions are intended for:
• the operator of the product,
• the installer of the product,
Both groups of persons must also have read the separate operating instructions in
addition to these installation instructions in full before using the product.
The installer must ensure the following:
• All installation instruction notes and specifications must be observed.
The installation steps must not be deviated from or altered.
• Only the original parts that were delivered may be installed.
• The locally applicable fire safety regulations must be complied with.
• The installation instructions must be passed on to the operator
after installation.
The operator must ensure the following:
• The installation requirements must be complied with.
• The product may only be installed and started up by qualified experts.
• The locally applicable fire safety regulations must be complied with.
• The instructions must be kept until the product is disposed of and be passed on to the
new operator in the event of a change of operators.
NOTE
Installation in the wrong environmental conditions will damage the
product!
Do not install product in the following environment:
> on exterior doors,
> in damp environments,
> in the vicinity of electromagnetically sensitive devices,
> in potentially explosive environments,
> on doors that are not certified as fire resistant doors.
NOTE
The product can be damaged by condensed water on cold
components!
> Before installation, please ensure that all product components are
at the ambient temperature!
> Store products at the installation site for an appropriate period
prior to installation.
5