Publicité
Installation Requirements
Before you begin the installation, make sure that you have the
following:
Phillips screwdriver.
Expansion screws, M6 screws and cage nuts.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ45 Ethernet cables, ber optical cables and a console cable for
connecting network devices.
Site Environment:
Do not operate it in an area that exceeds an ambient temperature of 50°C.
Make sure that the switch is level and stable to avoid any hazardous conditions.
The installation site must be well-ventilated. Make sure that there is adequate air ow
around the switch.
Do not install the equipment in a dusty environment.
The installation site must be free from leaking or dripping water, heavy dew, and
humidity.
Make sure that the rack and the working platform are well-earthed.
8
Publicité
