Publicité
S3410-48TS-P
PWR2
M2
STATUS
M1
PWR1
PoE
LEDs
Status
M1/M2
PWR1/PWR2
PoE/LED Mode
RJ45 (Switch Mode)
RJ45 (PoE Mode)
for port
1-8/1-24/1-48
RJ45
PoE (1-48)
State
Description
O
The switch is not receiving power.
The system is being initialized. Continuous
Blinking Green
blinking indicates errors.
Solid Green
The switch is operational.
Temperature warning, check the working
Solid Yellow
environment of the switch immediately.
Solid Red
The switch is faulty.
There is no expansion module or the
O
expansion module is not correctly installed.
Solid Green
The expansion module is correctly installed.
O
The power module is not in place.
The power module is in place but the AC
Solid Red
power cord or switch is abnormal.
Solid Green
The power supply is operational.
Solid Green
The indicator shows the switching status.
Solid Yellow
The indicator shows the PoE status.
O
The port is not linked.
Solid Green
The port is linked up at 1000M.
The port is sending or receiving data at
Blinking Green
1000M.
Solid Yellow
The port is linked up at 10M/100M.
The port is sending or receiving data at 10M/
Blinking Yellow
100M.
O
PoE is disabled.
Solid Green
PoE is enabled. The port is operational.
Solid Yellow
The port has a PoE fault of overload.
SFP+
SFP
5
Publicité
