Publicité
7. MAINTENANCE
DANGER! Risk of injury due to electric shock.
Warning! Always remove the plug from the socket before servicing, cleaning
or storage.
• Keep the product clean. Remove debris from it after each use and before storage.
• Regular and proper cleaning will help ensure safe use and prolong the life of the product.
• Inspect the product before each use for worn and damaged parts. Do not operate it if you find
broken and worn parts.
• Clean the product with a dry doth. Use a brush for areas that are hard to reach.
• In particular clean the air vents after every use with a cloth and brush.
• Remove stubborn dirt with high pressure air (max. 3 bar).
• Check for worn or damaged parts. Replace worn parts as necessary or contact an authorized
service center for repair before using the product again.
• Before and after each use, check the product and accessories (or attachments) for wear and
damage. If required, exchange them for new ones as described in this instruction manual.
Observe the technical requirements.
• This product does not contain any parts that can be repaired by the consumer. Contact an
authorized service center or a similarly qualifired person to have it checked and repaired.
• If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard. If the carbon brushes need to be replaced, have this done
by a qualified repair person (always replace the two brushes at the same time).
• Hex key is used to disassemble the hex screw on sanding pad.
FR
ES
PT
IT
EL
PL
UA
RO
EN
191
191
Publicité
