Publicité
FR
4. TECHNICAL DATA
ES
PT
IT
EL
PL
UA
RO
EN
NOTE: The declared vibration total value(s) and the declared noise emission value(s) have been
measured in accordance with a standard test method and may be used for comparing one tool
with another;
The declared vibration total value(s) and the declared noise emission value(s) may also be used
in a preliminary assessment of exposure.
WARNING! The vibration and noise emissions during actual use of the power tool can differ
from the declared values depending on the ways in which the tool is used especially what kind
of workpiece is processed;
The emissions need to identify safety measures to protect the operator that are based on
an estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time).
WARNING! The grinding thin sheets of metal or other easily vibrating structures with a large
surface can result in a total noise emission much higher (up to 15 dB) than the declared noise
emission values. Such workpieces should as far as possible be prevented from emitting sound
by suitable measures such as the application of heavy flexible damping mats. The increased
noise emission is also to be considered for both the risk assessment of noise exposure and
selecting adequate hearing protection
WARNING! Recommendation for the operator to wear hearing protection.
188
188
Model
Rated voltage:
Rated speed:
Rated Power :
Grinding pad diameter
Sandpaper diameter
Weight
Protection dass
Noise emission value
Uncertainty
Vibration emission value
Uncertainty
710DWS2-225.1001
220-240 V~
800-1800 /min
710w
215mm
225mm
3.6 kg
II
L
=85.2dB(A),L
=93.2dB (A)
PA
WA
K=3dB(A)
<2.5 m/s²
K.<1.5m/s²
Publicité
