Publicité
DAILY USE
1. SELECT A FUNCTION
Press
to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon
for one of the main functions or by scrolling through
a menu: To select an item from a menu (the display
will show the first available item), press
select the desired one, then press
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence. Pressing
allows you to change the previous setting again
TEMPERATURE / GRILL LEVEL
TEMPERATURE
When the value flashes on the display, press
or
to change it, then press
continue with the settings that follow (if possible).
In the same way, it is possible to set the grill level:
There are three defined power levels for grilling: 3
(high), 2 (mid), 1 (low).
Please note: Once the function has been activated, the
temperature/grill level can be changed using
DURATION
DURATION
When the
icon flashes on the display, press
or
to set the cooking time you require and
then press
to confirm. You do not have to set
the cooking time if you want to manage cooking
manually (untimed): Press
start the function. By selecting this mode, you cannot
program a delayed start.
Please note: You can adjust the cooking time that has
been set during cooking by pressing
to amend it and then press
END TIME (START DELAY)
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time. The display shows the end time while the
icon flashes.
END TIME
Press
or
to set the time you want cooking
to end, then press
function. Place the food in the oven and close the
door: The function will start automatically after the
or
to confirm.
to confirm and
or
to confirm and
: press
to confirm.
to confirm and activate the
period of time that has been calculated in order for
cooking to finish at the time you have set.
Please note: Programming a delayed cooking start time
will disable the oven preheating phase: The oven will
reach the temperature your require gradually, meaning
that cooking times will be slightly longer than those
listed in the cooking table. During the waiting time, you
to
can press
time or press
, in order to visualize information, it is possible to
switch between end time and duration.
3. DYNAMIC MENU
These functions automatically select the best cooking
mode, temperature and duration to cook, roast or
bake all the dishes available.
When required, simply indicate the characteristic of
food to obtain an optimal result.
WEIGHT / HEIGHT (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display, when prompted, and press
set the required value then press
DONENESS / BROWNING
or
.
In some DYNAMIC MENU functions it is possible to
adjust the doneness level.
DONENESS
When prompted, press
desired level between rare (-1) and well done (+1).
Press
or
In the same way, where allowed, in some DYNAMIC
MENU functions, it's possible to adjust the browning
level between low (-1) and high (+1).
4. START THE FUNCTION
or
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
During the delay phase, by pressing
will ask if you want to skip this phase, starting
immediately the function.
Please note: Once a function has been selected, the
display will recommend the most suitable level for each
function. At any time you can stop the function that has
been activated by pressing
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the
display. You can either select a different function or
wait for a complete cooling.
or
to amend the programmed end
to change other settings. By pressing
or
to select the
to confirm and start the function.
.
or
to
to confirm.
the oven
Publicité
